30in Solar Powered LED Flashing Yield Sign IP65 Waterproof Aluminum Reflective

⚠️ 30-Inch Solar Powered LED Flashing YIELD Sign – Diamond-Grade Reflective Aluminum Traffic Sign
Increase driver awareness in areas where vehicles need to slow down and yield with this 30-inch solar-powered LED flashing YIELD sign. Designed for outdoor traffic and property applications, it combines 9 high-power flashing LEDs, diamond-grade reflective film, an aluminum sign body, solar charging, and IP65 weather-resistant construction.
With its self-contained solar power system, the sign can operate without permanent electrical wiring, making it suitable for private roads, parking areas, roundabouts, intersections, lane merge areas, commercial properties, communities, and other controlled traffic locations.
💡 9 High-Power Flashing LEDs
The sign features 9 high-power LEDs positioned around the YIELD sign face to provide additional visual warning.
• 9 High-Power LEDs
• LED Luminance: >6000 mcd
• Flash Frequency: 40–60 Flashes per Minute
• Listed LED Working Life: 10,000 Hours
The exact LED light color is not specified in this listing.
🔺 Diamond-Grade Reflective Film
In addition to the flashing LEDs, the sign face uses diamond-grade reflective film to improve visibility when illuminated by vehicle headlights and other external light sources.
This combines:
• Active LED Flashing
• High-Visibility Reflective Surface
The reflective surface continues to provide passive visibility even when the LEDs are not illuminated.
☀️ Solar Powered – No Hardwiring Required
The integrated solar charging system allows the sign to operate without a permanent electrical connection.
• Solar Powered
• Solar Panel Output: 12V / 5W
• Approx. Charging Time: 6–8 Hours under suitable sunlight
• No Routine Hardwiring Required
• Designed for Standalone Outdoor Installation
For best charging performance, position the solar panel where it can receive maximum direct sunlight throughout the day.
🔋 Up to 5–7 Days of Operation
According to the supplied specifications, the sign can operate for approximately 5–7 consecutive days after a full charge, depending on operating and environmental conditions.
The supplied specifications also list a full-charge runtime of approximately 96–120 hours.
Actual runtime can vary depending on:
• Sunlight Exposure
• Weather Conditions
• Season
• Temperature
• Battery Condition
• Operating Mode
🌙 Automatic Low-Light Activation
The sign features a built-in light sensor designed to automatically activate the LED lighting under low-light conditions.
For a quick function test before installation:
• Turn the power switch ON
• Cover the solar panel to simulate nighttime conditions
• Check that the LEDs activate normally
This makes it easy to confirm operation before permanently mounting the sign.
🔄 Flashing Operation
The LEDs flash at approximately 40–60 times per minute, providing an active visual warning in addition to the reflective YIELD sign face.
The supplied product information also lists the working mode as Always On / Flashing.
🛡️ Heavy-Duty Aluminum Construction
The sign is constructed from aluminum, providing a sturdy outdoor structure with good resistance to rust and corrosion.
• Aluminum Sign Body
• Rust-Resistant Material
• Corrosion-Resistant Construction
• Suitable for Outdoor Installation
• Designed to Withstand Normal Outdoor Weather Exposure
🌧️ IP65 Weather-Resistant Design
With an IP65 rating, the sign is designed to resist dust and water exposure encountered during normal outdoor use.
Suitable for environments involving:
• Rain
• Dust
• Sun Exposure
• Changing Weather Conditions
• Outdoor Traffic Areas
IP65 does not mean the product is designed for underwater use or continuous submersion.
📐 Large 30-Inch YIELD Sign
The sign measures approximately:
30" / 76 cm
The large triangular YIELD face provides a substantial visual warning area for locations where drivers need clear notice to slow down and yield.
🌡️ Wide Listed Operating Temperature Range
The supplied specifications list:
• Working Temperature: -40°F to 140°F
• Working Humidity: 5%–93%
Actual performance can vary depending on battery condition, solar charging availability, weather, and installation conditions.
🔩 U-Shaped Mounting System
The sign uses a U-shaped hoop mounting system for installation on a compatible post.
• U-Shaped Mounting Design
• Applicable Post / Column Diameter: 76–89 mm
• No Electrical Wiring Required
Always measure the intended mounting post before installation to confirm compatibility.
🚦 Multiple Applications
This solar flashing YIELD sign can be used in a variety of locations where additional visibility is desired, including:
• Roundabout Entrances
• Intersections
• T-Intersections
• Lane Merge Areas
• Road Junctions
• Private Roads
• Parking Areas
• Commercial Properties
• Industrial Properties
• Community / HOA Areas
• Shared Roadways
• Pedestrian Areas
• Property Entrances
For use as an official traffic-control device on a regulated public roadway, applicable installation and traffic-control requirements should be verified before installation.
📏 Product Specifications
• Product Type: Solar Powered LED Flashing YIELD Sign
• Sign Type: YIELD
• Sign Shape: Triangle
• Sign Size: 30" (Approx. 76 cm)
• Material: Aluminum
• Reflective Material: Diamond-Grade Reflective Film
• LED Quantity: 9
• LED Type: High-Power Flashing LED
• LED Luminance: >6000 mcd
• LED Flash Frequency: 40–60 Flashes/Minute
• Listed LED Working Life: 10,000 Hours
• Power Source: Solar
• Solar Panel Output: 12V / 5W
• Charging Time: Approx. 6–8 Hours
• Full-Charge Runtime: Approx. 96–120 Hours
• Listed Consecutive Operation: Up to 5–7 Days, depending on conditions
• Light Sensor: Yes
• Weather Rating: IP65
• Working Temperature: -40°F to 140°F
• Working Humidity: 5%–93%
• Mounting Type: U-Shaped Hoop / Bracket
• Compatible Post Diameter: Approx. 76–89 mm
• Installation Type: Outdoor
📦 Package Includes
• 1 × 30" Solar Powered LED Flashing YIELD Sign
• Solar Panel / Integrated Solar Power System
• U-Shaped Mounting Hardware
• Installation Hardware as Supplied
📌 Important Installation & Use Notes
• Before installation, turn the sign on and cover the solar panel to simulate nighttime conditions to confirm that the LEDs operate normally.
• Install the solar panel where it receives maximum direct sunlight during the day.
• After extended storage or a long period without use, the supplied instructions recommend charging the unit in full sunlight for approximately 3 days before normal operation.
• If the sign will not be used for an extended period, turn the switch OFF to reduce unnecessary battery discharge.
• Do not disassemble the product.
• Solar charging and operating time vary with sunlight intensity, weather, season, temperature, installation angle, battery condition, and usage.
• The exact LED light color has not been confirmed, so no LED color is claimed in this listing.
• IP65 provides protection against normal outdoor dust and water exposure but does not make the product suitable for submersion.
• For installation on public roads, regulated intersections, highway entrances, pedestrian crossings, or other official traffic-control locations, verify all applicable federal, state, and local requirements before installation.
✨ 30" YIELD Sign + 9 Flashing LEDs + Diamond-Grade Reflection + Solar Power
Combining a large 30-inch sign face, 9 high-power flashing LEDs, diamond-grade reflective film, aluminum construction, IP65 outdoor protection, and a self-contained solar charging system, this YIELD sign provides active and reflective visibility without requiring permanent electrical wiring.
💬 Please feel free to contact us if you have any questions after delivery. We're always happy to help.