30in Solar LED Do Not Enter Sign 12LED Engineer Grade Reflective Aluminum

⛔ 30-Inch Solar Powered LED Flashing DO NOT ENTER Sign – 12 LEDs, IP65 Aluminum Reflective Traffic Sign
Improve visibility around private roads, parking lots, commercial properties, warehouses, factories, private residences, property entrances, and other controlled traffic areas with this 30" × 30" solar-powered LED flashing DO NOT ENTER sign.
The sign combines a large reflective red-and-white face, 12 flashing LEDs, a dedicated solar panel, and two selectable operating modes. Its heavy-duty aluminum frame and IP65-rated construction are designed for outdoor installation without requiring hardwired electrical power.
☀️ Solar Powered – No Hardwiring Required
The included solar panel charges the internal power system during daylight hours, allowing the LED warning lights to operate without a permanent wired power connection.
• Solar-Powered Operation
• Dedicated 13.8" × 13.8" Solar Panel
• Charges During Daylight
• Designed for Standalone Outdoor Installation
• No Routine Hardwiring Required
Actual charging performance can vary depending on sunlight exposure, weather, installation angle, operating mode, and environmental conditions.
🔋 Up to 7 Days of Operation on a Full Charge
According to the supplied product specifications, a fully charged system can provide up to 7 days of continuous operation.
This extended battery backup helps maintain operation through periods when sunlight may be limited.
Actual runtime will vary with solar exposure, weather, temperature, battery condition, and selected operating mode.
🌙 Dusk-to-Dawn Flashing Mode
For automatic nighttime operation, select the Dusk-to-Dawn Mode.
In this mode:
• Daytime – Lights Off
• Nighttime – Automatically Flashes
• Dawn – Automatically Turns Off
This mode allows the sign to conserve stored solar energy during daylight while providing additional visibility after dark.
🕐 24-Hour Flashing Mode
Need the warning lights operating during both the day and night?
Select the 24-Hour Mode for continuous flashing operation.
• Daytime – Flashing
• Nighttime – Flashing
• Designed for Continuous Day & Night Visibility
The two operating modes are controlled by the switches located on the sign.
🔘 Two Independent Mode Switches
The sign features dedicated controls for choosing how the lighting system operates.
24-Hour Mode:
Turn on the corresponding switch for flashing operation during both day and night.
Dusk-to-Dawn Mode:
Select the nighttime mode for automatic flashing after dark and automatic shutoff during daylight.
This gives you flexibility depending on where and when additional visibility is needed.
💡 12 Flashing LEDs
The sign features 12 LEDs positioned across the sign face to provide additional active visibility.
• 12 LED Lights
• Flashing Operation
• Reflective Sign Face
• Designed for Increased Low-Light Visibility
The combination of active LED lighting and reflective material helps the DO NOT ENTER message remain noticeable in different lighting conditions.
🔴 Engineering-Grade Reflective Film
The sign face uses engineering-grade reflective film designed to reflect incoming light.
This means the sign doesn't rely solely on its LEDs for visibility. Vehicle headlights and other external light sources can also reflect from the sign surface and lettering.
🏗️ Heavy-Duty Aluminum Frame
The sign is constructed with a heavy-duty aluminum frame designed for outdoor use.
Compared with untreated steel construction, aluminum provides useful resistance against outdoor corrosion and rust.
• Aluminum Frame
• Corrosion-Resistant Construction
• Suitable for Outdoor Installation
• Designed for Long-Term Exterior Use
🌧️ IP65 Weather-Resistant Construction
The sign is rated IP65, providing protection against dust and water exposure associated with outdoor installation.
Suitable for typical outdoor conditions including:
• Rain
• Dust
• Sun Exposure
• Changing Weather Conditions
IP65 does not mean the product is designed for submersion in water.
📐 Large 30" × 30" Sign Face
The sign features a large:
30" × 30" (762 × 762 mm) sign face.
The large-format design, reflective surface, and integrated flashing LEDs provide both passive reflection and active illumination for locations where a highly noticeable DO NOT ENTER warning is needed.
☀️ 13.8" × 13.8" Solar Panel
The dedicated solar panel measures approximately:
13.8" × 13.8" (350 × 350 mm)
The panel is positioned above the sign to collect sunlight and recharge the system during the day.
🔩 Mounting Hardware Included
The product includes mounting hardware for installing the sign to a suitable compatible post or support structure.
• U-Shaped Mounting Brackets
• Screws / Nuts
• Mounting Hardware
Post/pole is not shown as an included component.
🏢 Multiple Installation Applications
The solar-powered flashing design can be useful for a variety of controlled-property and traffic-management applications, including:
• Factories
• Private Residences
• Private Roads
• Parking Lots
• Commercial Properties
• Warehouses
• Industrial Facilities
• Property Entrances & Exits
• Restricted Entry Areas
• Loading Areas
• HOA / Community Areas
• Work Zones
• Other Locations Requiring a Visible DO NOT ENTER Warning
Always confirm applicable local requirements before using the sign for public-road or regulated traffic-control applications.
⚡ Solar Operation for Flexible Placement
Because the sign uses its own solar charging system, installation doesn't require running a permanent electrical line to the sign.
This can be particularly useful in locations where access to electrical wiring is inconvenient, such as private roads, parking areas, factories, warehouses, industrial properties, gated entrances, and remote locations.
📏 Product Specifications
• Product Type: Solar Powered LED Flashing DO NOT ENTER Sign
• Sign Message: DO NOT ENTER
• Sign Color: Red / White
• Sign Size: 30" × 30" (762 × 762 mm)
• Sign Thickness: Approx. 2.0" (50 mm)
• Solar Panel Size: Approx. 13.8" × 13.8" (350 × 350 mm)
• Weight: Approx. 22 lb
• Frame Material: Aluminum
• Reflective Material: Engineering-Grade Reflective Film
• LED Quantity: 12
• Lighting: LED
• Power Source: Solar
• Operating Modes: 24-Hour Flashing / Dusk-to-Dawn Flashing
• Full-Charge Runtime: Up to 7 Days under stated conditions
• Weather Rating: IP65
• Mounting Type: U-Bracket Mount
• Installation: Outdoor
📦 Package Includes
• 1 × 30" Solar LED DO NOT ENTER Sign
• 1 × Solar Panel
• U-Shaped Mounting Brackets
• Screws / Nuts / Mounting Hardware as Shown
📌 Important Notes
• Mounting post/pole is not shown as included.
• Solar charging and operating time depend on sunlight, weather, installation angle, temperature, battery condition, and selected lighting mode.
• The stated up to 7-day runtime is based on the supplied product specifications and may vary under real-world conditions.
• IP65 is intended for outdoor dust and water resistance; the unit should not be submerged.
• For installation on public roads, intersections, construction traffic-control areas, or other regulated locations, the buyer/installer should verify all applicable federal, state, and local requirements before installation.
✨ 30" Visibility + 12 Flashing LEDs + Solar Power + Two Operating Modes
With its 30" × 30" reflective face, 12 LED lights, solar charging, IP65 outdoor construction, aluminum frame, and selectable 24-hour or dusk-to-dawn flashing operation, this DO NOT ENTER sign provides a flexible visibility solution without requiring permanent electrical wiring.
💬 Please feel free to contact us if you have any questions after delivery. We're always happy to help.